Fire extinguisher

Ever wonder what it's like to actually use a fire extinguisher?

Well, the one in my Jeep got recalled. A few days ago the replacement finally arrived. As a concerned citizen and proper adult I wanted to make sure I disposed of the recalled fire extinguisher properly. It wouldn't be responsible of me to leave a possibly faulty fire-extinguisher lying around.

As it turns out the proper way to dispose of a fire extinguisher is to first discharge it, and then throw it away.

So, I was obliged to discharge the fire extinguisher. A tragedy:


I think it actually shot a bit farther than that, and the camera caught the beginning of the first burst (it took 3 photos in a row, the first 2 had no burst yet). This is an ABC extinguisher I believe, using a powder, so the powder blew a short distance as a cloud like if you were throwing flour in the air to try and light it on fire (not that I've done that... no never, certainly not).

Again, this is my car fire extinguisher (I got a new one, since my old one is mounted in Jess' truck, and I figured she might need it too), so it's tiny. It probably shot stuff for about 4, maybe 5 seconds. I see why people say to use very short bursts, if you miss you want to get a chance to pause and re-aim, not use it up n the wrong direction.

That is all, I just thought I would share the amusing experience.

Metal Working

For christmas Jess got me a metal-working class. 4 3 hours classes in a metalshop learning from experienced folks. As it turned out it was basically open ended "so, what do you want to learn?" With 2 guys running the shop, 2 of us taking the class, and maybe 1 to 3 other folks hanging out in the shop and getting help occasionally, there was lots of 1-1 time. Here's some of the stuff I did.


I decided to touch on blacksmithing, but I have a decent idea how to do a lot of things with blacksmithing. So I wanted to focus on getting welding to the point where I could actually go out and buy a welder, and weld something that mattered. At that level of welding, MIG is what you generally want to use, so that's what we learned (though a lot of it applies to other welding as well).

Day 1
We spent the first day just getting a run-down of the shop, how to use a coal forge, figuring out the welders, loading in a new wire spool, making a few beads, and covering the basics.

Day 2
Both of us decided to get in our blacksmithing. So I made the hook you see on the bottom left. The process goes like this (skipping all the heating it up parts)
1) pound out the tip to make a square
2) roll it on the anvil as you pound it to make it round
3) start the curl on the anvil horn
4) finish the curl by holding the straight part flat on the anvil and striking far down on the curve towards you. Then bring the bar up a little off the anvil, and correspondingly strike the curve a little closer to the tip and a little lighter. Repeat until the bar is vertical instead of horizantal and you are striking down.
5) make the "hook" on the horn
DSC00668 6) hammer the segment you're going to twist so it has flat sides or grooves or something, so the twist shows up
7) grab it with a vice and twist it!
6) cut the end off in the right spot using the... thingy who's name I forget (it's basically an edge you set the rod on and hammer *almost* through, then you brake it off with pliers)
7) make square tip at the other end
8) hammer it flat
9) drill it

Oddly, getting an even twist is actually easy, you just do it not too hot. it's a bit harder to make it *uneven*. This is true because we were working mild steel (as most blacksmiths do these days), that means it is very consistent in it's carbon an allow content. Traditionally blacksmiths worked wrought iron, which is far less consistent and thus to get an even twist you have to work it unevenly, so you have to do it very hot and it takes a lot of skill

Day 3
Down to business on welding. The goal was, making a box that will hold water. In a more serious class for professionals the goal would be to make that box hold 100 psi for 24 hours. We're just mucking about though, so didn't go that far.


I decided to do this by sitting the box corner-to-corner, welding the inside first, and then filling the space on the outside of each crack. I did this to build 2 half-boxes of 3 sites making a corner, then attached the two together (welding only the outside at that point of course).

The idea was good, but I missed one KEY step to really doing it right. The right way to do it (besides cutting more carefully) is to *tack* weld before you make the real welds. I could've tack welded the 3 sites together seperately and checked that everything was really going to fit *just* right. The inner welds I did weren't of much use. If I did this again I'd probably skip them and simply tack-weld the 2 3-sided pieces together at that point and make sure it all lined up *perfectly*... if not cut it apart and try again. Then you fill the outside.

That said, even though I had a huge gap I filled it in well enough and the end result does hold water without leaking. Pretty cool.

Note that what looks like a good weld might not really be a good weld. Prettyness is a sign of skill and thus a proxy for knowing technique, but not necessarily a sign of good binding. It's possible to make a bad weld look pretty. Good binding has to do with avoiding gaps, how much you heat up the metal, and how well you get the metal to blend together, and mostly... prep.

Most of the time spent building this box was spent not with a welder, but with a grinder. We cut the plates first. Then I had to grind all the faces to ensure I'd get a good binding. Being new to a grinder this took quite a while, but no matter how good you are... most of welding is actually grinding, not holding a welder and laying a bead.

Day 4
Now comes the real challenge, taking BIG pieces of metal, and joining them with a tiny little MIG welder. This is done by cutting V-notches in to both sides of the metal then slowly filling in the space one bead at a time. You start with the pieces not quite touching and fill in the almost touching points, then flip it and do that on the other side, avoiding ending up with any air gaps. Then you work your way up filling in the V cut.


If you are anything like me, this probably looks like a pretty bad weld to you. This weld represents about 1.5 hours of grinding and a half-hour of welding. We didn't want to waste time, so I didn't grind it out to make it all pretty, and I didn't add a cap-weld (though the bottom side of the upper picture was cap-welded by our instructor, just t show us how it's done).

Interestingly, while this weld is far from ideal (the root pass is pretty bad), it's a lot better than you might expect. Unfortunately we missed the real center of the weld when we cut it, but still, it shows that this metal really is bonded together.


What you see as vertical ridging is just marks from a very sad band-saw. If you stare at that image really closely you can see horizontal marks. At first we thought those were showing lines between my beads of weld, but after staring at them and considering how I was welding I'm certain that's not what they are, I believe they also are a side-effect ot he band saw.

BUT if you look really carefully at the outer 1/4' of the cut on each side (the part that cut through my actual weld), you can see that there are little pits in the metal. These are air-gaps due to poor technique on my part, and they shouldn't be there.

I'll need a lot of practice if I want to be a professional welder (which I don't), but for my first heavy joint I'm pretty damn happy with it. For things like building armor for a 4x4, welding up a picture frame or a metal fence, etc. I can weld!

We also took some tubing and tried welding that, as well as patching it after we blew through it by accident (which is easy to do on pipe, due to how it traps heat). With mild steel you can patch it and grind it and make it pretty much as strong as new. This isn't true for steels that are more heat sensitive (crystallize more easily) and need to be re-tempered after you weld them to get full strength (e.g. cro-moly). This is dependent on the alloy, carbon content, etc.

Unlike my last welding class, now I feel like I can go buy a MIG welder, and actually weld something. I have some vague plans to build rock-sliders for my Jeep... maybe. We'll see. If not maybe I can find another excuse to do some welding, like shoring up cave entrances for caving, repairing tools, etc.

I'd actually be helping clean up the entrance to a cave today, but I'm stuck at home due to an on-call shift. Oh well, I guess you can't play all the time. It's a good chance to write up some experiences though :).


Jeep lift

I know a lot of my readers aren't car people. Don't worry, I've got some more non-Jeep posts coming soon. We processed a roadkill deer recently. I finally made a form of tarred canvas and I'll post about that once I get a chance to test it. I joined a grotto last weekend (a group of cavers). I just got a mountain bike yesterday, took it for a spin around the neighborhood today.

But, since I posted the others, I figured I ought to post a followup since I finally finished installing my lift. Here's the mods on my vehicle so far (in the order they were installed):
  • drains: drilled in plastic, floor plugs pulled
  • hitch reciever: like factory, forgot the brand
  • vacuum pump relo: OR vacuum pump relocation bracket
  • fenders: trim, remove liner, spray bedliner for wheel-wells
  • programming: turn signal, light timeout, acc timeout
  • spare-tire mount: teraflex hinged tire-carrier
  • highlift mount: teraflex accessory mount
  • headrests: bent back
  • CB radio: midland CB, Wilson 305-483 Silver Load antenna
  • Winch: superwinch 9500, synthetic rope
  • Winch plate: Rough Country, with D rings
  • Tires: duratrak 285/85R16
  • wheels: 4.25" backset steel
  • E-bake: pulled the bracket
  • brake lines: synergy
  • ABS sensors: rerouted and ziptied
  • diff breathers: home-grown
  • shocks: Bilstein 5100
  • rear sway-bar links: some cheap brand
  • front sway-bar links: relocated from the rear
  • springs: OEM 18/59 (ebay), replacing factory 13/55's (1.5-2" lift)
And here's what it looks like:

DSC00645 DSC00641

The last 4 items on the list are the actual lift. Overall I think this setup adds ~2" travel to one end and ~4" to the other (I forget which is which), and lifts the vehicle 1.5-2". Due to the fender trim there's no need to extend the bumpstops even running 33" tires. The shocks are just barely not fully compressed at full stuff, so I'm getting the full range of the bilstein 5100 shocks.

So, how do I like my new suspension?


The stock shocks on the sport model of the wrangler are terrible, as are the springs actually. The handling was really poor. The body pitched forward and backward when I hit a bump, and the rear end would skip really badly while cornering. It felt kindof unsafe. That's a lot of what got me doing the lift now, I had expected to wait a while. I got the bilstein shocks in an attempt to improve the handling, but with the extra droop they provided I was in danger of inverting my sway-bar, so I needed longer links to keep that from happening. I was also nervous about the brake lines and ABS sensors so I did them too.

I bottomed out (almost high-centered) not long ago while out wandering. Given that I was getting the rest I figured why not pick up some stock springs on ebay and see what lift that got me, since you can get them cheap.

I did the brake-lines and ABS sensors first, then the shocks and sway bar links. That did improve my handling, the skipping on the rear got a little better, but not nearly as much as I'd hoped. Also, the sway bars were now poorly positioned (too far from level) so my body roll got worse.

Next I did the springs and the stiffer springs made all the difference. The body pitching is gone, the back skips even less, the body roll is less than ever, it doesn't dive when I turn or brake. I love it.


No-one but me has worked on my Jeep since it rolled off the lot, so I did this all myself. Sorry, I didn't take in process photos like I meant to.

I did the ABS sensors and brake lines one wheel at a time, jack it up, remove the wheel, do the work, put it back together.

The hard part of this was figuring out how to jack up the car. Jacking from the front-wheel didn't work well because the steering wheel turns. Wranglers have no key lockout on the steering column. Jacking off the bumper I would get it up and at some point it would lift the other front-wheel off the ground, at that point it's sitting on just the 2 rear wheels and can fall sideways too easy, and the jack would fall over.

The solution was 2 fold. First, level the car before you start! This should be obvious, but I tried all sorts of *other* ways to compensate for the hill. Leveling the set of wheels that stay on the ground though worked wonders. Second, jack one side a little ways, throw a jack-stand under it, then do the other, jack stand, back to the first, adjust the jack-stand up. Between the two I was finally able to safely get the car up in the air with the axles at full droop and the wheels off the ground.

Note that I'm doing this to work on one end of the car at a time, leaving the other on the ground. Getting the whole thing on jack-stands would be significantly more difficult.

In theory you can install the shocks without lifting up the vehicle at all, but I couldn't get them in while compressed. With it off the ground it's much easier. The first time I did it I actually levered them in to place (compressing them) using a screw-driver so I didn't have to shift anything after pulling the stockers off. That worked prety well.

Once you can get both wheels off, the sway bar is trivial. Disassemble it, put it back together. I did notice that there's a actually a spot for a wrench next to the ball fitting, which is way easier to use than a hex-wrench.

To get the springs in I jacked the car up pretty high and pulled both wheels off. I took off one end of the sway-bar link again. I then placed the factory sissor jack (with an extra block under it) under the axle and lifted it just a bit so it wasn't hanging on the shock so I could unbolt the shock again. Then I just lowered the axle down. The axle stopped dropping at some point due to the control arm bushings, I just shoved it a bit further and popped the spring out, then popped the new one in. Jack the axle back up, reassemble everything, and then do the other end of the axle.

So, very very easy... if you can figure out how to get the jeep up on jack-stands or have access to a lift


  • shocks, ~$300
  • springs, ~$180
  • sway-bar links, ~$30
So, this comes to ~$500.0 for the lift and suspension components. Given how much it improved the ride, with the bonus of improving my entrance, exit, and break-over angle and significantly improving flex, I'm pretty happy with it.

When I went looking for kits that get those gains with only a small lift all I could find were kits advertised as e.g. a 1.5" lift that actually lift it more like 2.5" and cost more like $1500.

Planning a lift

It took me a lot of research and thinking to figure out where to *start*. On the Tacoma this was pretty simple as it's independent front and leaf-spring live-axle in the rear, but Jeeps use a live-axle coil suspension which makes for a lot of different moving pieces. All of the components need to work together. If you're planning a suspension modification I have a suggestion: Start with your tire size and how much you want to trim fenders/bodywork/etc, and let that decide your bumpstop.

Once you have your bumpstop height, everything else chains from there. That's because your bumpstop height decides how long a shock body will fit when everything is fully flexed. You need to hit the bumpstop and not the shock body, so you want a shock that's just a little bit short, that way you get to use all the travel the shock gives you.

Once you've chosen your shock, your shock is likely to be the limiting factor on your droop. Now you can use your maximum droop to decide how long your spring needs to be uncompressed. If the spring is shorter than this you'll have to limit your flex by attaching the springs to the axle and the vehicle, or using limit straps. The droop is also what matters for brake lines, breather tubes, diff locker wires or air-tubes, exhaust relocation, it's a factor for driveshafts, etc.

Now that you're picking your springs you can figure out normal ride height. Note that nothing above was impacted much by ride-height. You can have the normal ride be basically anywhere in that travel . It's just a matter of how stiff your springs are.

Now you'll want to pick sway-bar links that accommodate that droop, but also come out near level at your normal ride height. You may have to give up on getting them level.

If you're going more dramatic you may also need track-bars to recenter your axles, this is mostly based on normal ride-height, but may be impacted by trying to avoid tires hitting the body at full flex. Driveshafts are also mostly based on ride-height, since they get most of their wear at normal angles, but I'd imagine that not having them bind too badly would still be important even with a low ride-height and a lot of droop. Control arms are based on ride-height as you need them to correct camber, and that's all about highway driving.

I'm not expert in the area, and you may note I didn't do ANY of the complicated stuff... but I found this model to be a useful way to work through planning a lift. The internet would have you thinking that tire-size decides your ride height, and everything else stems from there. But ride-height is actually one of the more independent variables, while bumpstop is really solidly fixed by tire-size and fenders, and due to shocks a lot stems from that.

Just a thought.


While I definitely used the large knobby tires this winter to get in and out of the driveway (and get Jess truck unstuck once), I haven't taken old blue offroading since I did the lift (I finished it last weekend). So, I'm really curious to see how it all performs. I can't use all my flex right now since I don't have sway-bar disconnects. I believe that the sway bars will lift my wheels off the ground even though I have suspension play left, so discos will likely be the next purchase. I'd rather get a more multi-setting front sway-bar, but those are *expensive*, so I'll probably just do discos for now.


Overall the lift was pretty cheap, it handles far better than it did on road, and it should be strictly better off road. So, I'm really happy with it. It's also always fun using things you've really spent some time and energy on. A car is no exception. I'm looking forward to getting it on the trails again... possibly this weekend!


Later on I did adjust my drag link, by about 1/8 of a turn. This corrected my steering wheel by maybe 5 degrees, probably less. I did this by taking a 15mm wrench with me and driving back and forth down a stretch of fairly straight highway, and just tweaking it until I found just the right setting.

Also, I've now taken this setup off-road, and indeed it performs very well, I'm extremely happy with it. I think the height came out just right, significantly improving break-over angle. I bottomed out once, and that was on my diff, so that's a matter of tire-size, not lift height.


Roadkill deer today!

I found a roadkill deer today!

I found her while out on a drive in GW west of here. It was a young doe killed primarily by a head strike. The only other notable damage were some broken ribs, and she was a bit bloodshot on that side.

I'm not sure how long she'd be been there. She'd definitely been frozen in the snow, but the scavangers hadn't gotten to her at all. We just finished butchering her. The meat is good excepting the skirt stakes, which had turned. We decided to bail on the organ meats and buried them with the other offal. We could still eat the skirt steaks but we wanted to give some to the dog anyway, so let her have those cuts.We've got ribs in the oven with a barbeque sauce I mixed up. The legs are still out in the garage hanging in pillow-cases to keep the flies off, they'll be fine like that for a few days. We'll get to those in a day or two. Jess sliced up the backstrap and it's jerking in the dehydrator.

I tried scraping the hide green and the hair was tearing, so it's soaking overnight. I threw in two handfulls of hardwood ash just to avoid getting staff when I work the hide tomorrow. My plan for the hide is to try a method a friend of ours told us about a while ago. He claims he can do an elk in 6 hours of work with this method. If we're recalling right you start with a green hide, scrape the grain off (which I'll do tomorrow), then acidify it with tanic acid, and then soften it after the tanic acid has made the glue all loose and easy to remove. Then smoke as normal. I had hoped to skip the bucking step with the ash, but the hair just wasn't slipping.

So, another hide to work on (a second thin one, so I've probably got enough to make a shirt or something) and enough meat for several months for Jess and I. Death is always sad, but it also brought us joy, thank you deer.

It's been a beautiful day. It hit the 50's, the 10" of snow is mostly melted off. Jess and her guest went on a hike while I was off driving, and now we're exhausted and chilling out with wonderful smells wafting through the house.