2017-10-29

non-synthetic water bottle + carrier

I posted about making some leather gaskets recently http://www.blog.smalladventures.net/2017/07/non-synthetic-waterbottle-gaskets.htmlThis worked well enough to be tolerable for some uses, but it still leaked making it annoying for others.

Since them I picked up a new water bottle that I thought would be a lot easier to seal using this type of gasket, a 40oz Kleen Kanteen narrow mouth (and metal cap). So I made a new gasket for it:

IMG_20171025_101700


I used the same technique as my last gasket, where I cut it much smaller than the actual lid. Then I soaked the gasket in water and stretched it until it fit on to the lid. That done I let it dry most of the way while on the lid.

Just using this technique, it still leaked, so I decided to try something else. I repeated the above process, but with a thicker leather, then I made up a fairly strong mixture of wax in turpentine much like I use for treating canvas http://www.blog.smalladventures.net/2017/08/howto-waxing-cotton-2.html. I soaked the gasket in this mixture for a while.

IMG_20171020_124959

The turpentine smell hasn't fully dissipated, but the end result is good enough I can carry the bottle in a waterproof backpack and find no water in the backpack afterwards, or leave it sitting on it's side on the truck platform next to me while I'm sleeping. I won't argue turpentine is great for you, but it should evaporate and thus not be a problem.

Alright! I finally have a GOOD waterbottle. So, the next step is to figure out how to carry this on my backpack. I've been carrying a bottle on a string slung over my shoulder, and this gets really annoying, especially on rough trails. So, here's what I came up with.

IMG_20171025_150841

The fabric is from a torn American WWII military tent I picked up... it's a 6 ounce cotton canvas. I sewed a strip of leather in to the top hem to give the lip some stiffness so the waterbottle would slide in easer. Then I sewed a patch of leather to this, with slits cut in it. The stitches across the top were done with a speedy-stitcher, but it was breaking the threads on the canvas, so I switched to using a hand-awl to punch holes and then stitching with a needle and thread for the rest of the patch.

I used the patch to tie the holder to my pack frame. I can push up on the bottom of the bottle, gathering the fabric in my hand to slide the bottle out.

IMG_20171025_151603

And with a little finagling I can slip it back in by pulling the fabric out just a bit first.

IMG_20171025_151610


End result: I FINALLY have a way to comfortably carry water comfortably while backpacking without soaking my leg  or using any synethetics! Woot!

Insulated Growlers: not just for beer

After about a year on the road Angie and I decided we really wanted an insulated growler. The original thought was so we could drink cold beer. We wanted something all metal (excepting gasket), and Kleen Kanteen seemed like just about the only option on the market. Finally we bit the bullet and picked this up:

IMG_20171025_101518

We've had a 1 pint Kleen Kanteen thermos each for some time, and we love them. We use them instead of mugs for drinking tea, and often use them hiking to carry warm drinks. I've found mine to be pretty great for water while skiing as well. We use these every morning (and many other times as well), making them among our most used utensils.

After we got the Growler we suddenly realized we could use it for storing MILK! It will keep something cold for ~48 hours. This means milk will still be tasty for ~72 hours, which is AWESOME. Yes we have tested this, and it works even in warm weather. We both adore milk. If we can find milk in a glass jug it's even better, we can walk out, pour the milk in to the growler, and then return the glass to be refilled. No waste, we get the deposit back, and we get good milk.

Next we realized we could use it for tea. In cold weather it's great to just drink tea all day, but boiling water over and over again gets annoying. Using the big thermos and our small thermoses together we can make 3 liters of tea at a go. Conveniently this is as much water as our largest pot (Angie's cast iron pot) fits anyway. As a bonus the flip-top (in contrast to a screw top) makes it easy to leave tea-bag strings hanging out while the tea is brewing. The silicone gasket still seals plenty well.

Of *course* we've also used it for beer as well :). It keeps the beer good to drink for long enough to drink it the next evening around camp and still enjoy it. Also, it feels good to walk in to a brewery and walk out with beer, and again... no waste.

Overall we feel really silly for not having bought one a year ago. Using it for beer turned out to be a bonus, with milk and tea being by far our favorite and most common uses.

For anyone on the road who loves milk or tea I HIGHLY recommend picking one of these up. In fact, I will probably keep using it instead of a tea-pot for drinking tea when we settle down someday.