2013-06-07

Archery: equipment matters

This morning I started my day by driving out somewhere where I could scrape down a hide I'm working on without bugging anyone. Near noon I was throughly exhausted and hadn't finished, that's a story for another time.

Anyway, I was near the archery range, so I figured I'd shoot a bit before heading off to other things. While shooting I was messing with my brace height, I couldn't get the arrows to fly straight, occasionally one would, but rarely. It seemed weird so I kept tweaking it up and down.
P1010279 (Archery enthusiasts will note some major flaws in my form here. This is an older photo. My left wrist is collapsed and the bow is resting on my palm. My right elbow is high. My knees are nearly locked, I'm standing on my heals, and my rear leg is loaded.)

Everything was wrong

A couple of the older guys there commented "have you ever tried shooting a naked shaft?"... Jokes aside... Well, no in fact I had not. These guys know tons and tons and were kindof bored today so decided to help me out. I tried shooting one of their arrows that was unfletched, it hit the bale pointing way off to the left, multiple shots in a row... interesting. But, that was his arrows. I had some arrows that had lost their fletching too, so I went and grabbed one and shot that. Out of 10 shots, 9 hit pointing way left. In case it was my release they both tried shooting... same result. We tried increasing the brace height several times, but got no change. One of them pointed out that my knock height was also wrong, causing the arrow to hit pointing down slightly, we lowered my knock by about 1/8'th of an inch. I shot from sitting for this actually so I was at the same height as the target, making the flattness of the arrow easier to see.

Next one of them realized my string was too large for my arrow knocks, he pointed out that this will completely blow the release anyway, even if everything else was right. Still it was shooting left though.

I've been shooting 1916 (that's a stiffness of the arrow spine), that's what's in the picture above actually. At a 26" draw. My bow is a really nice 45 lb (at 28" draw) bear recurve. Several people at the range have fawned over the bow actually. It was a luck find on ebay.

Mike Dickerson, one of the two guys, then picked up an arrow of his, stripped the fletching off and handed it to me. It was a 1716. I tried shooting that. It flew dead straight, not a wobble, and hit the bail pointing almost perfectly towards me. I shot that several times of 6 shots 5 pointed directly at me. Mike shot it, it was perfect.

Then Mike grabbed a carbon arrow 25/45 spine (carbon is rated differently than aluminum). This one had fletching still. I shot it, and it flew like a dream, dead straight and right where I was pointing. Wow!

Mike then sat down and made me a new string out of B55 using the Flemish twist technique. The Flemish twist, while being easy to make, also allows adjustment of brace-height by adding or removing twists from the string. I've played with this a little but Mike is incredibly good at it. It would've taken me half a day, it took mike about half an hour. The new one was 8 strands, and thinner strands than the previous. Now the arrows fit smoothly on the string. He set it to the same measurements as we'd set the previous string to as we were fiddling. 8 1/4" brace height 3/8" knock offset.

The bow now feels *completely* different. The sound changed, the shock after release that runs through my left hand is totally different. And when I release the 25/45 carbon arrow goes perfectly straight. I shot that one arrow for a while before heading out. I need to make a trip to an archery shop now.

Technical nerdery (skip if you aren't interested in archery of physics)

So, for non-archery folks, lets talk about the properties of bows, arrows, and shooters. Here's a list of the interesting properties

  • Shooter:
    • draw length - length from the shooters trigger hand on release to the arrow rest. Obviously this is dependant on the shooter's draw location. If they draw to their chest (yes people do this) it'll be different than if they cheek draw.
    • release - this is a very fuzzy property, but people's releases differ even among good shooters, such that the same bow setup may work perfectly for one person but not for another even with all else equal.
  • Bow:
    • poundage - forwards force applied by the shooter to the string at full draw. Usually this is measured at 28", though not always.
    • brace height - distance from the arrow rest or the hand to the string when the bow is strung but not drawn
    • speed - this is really a result, but people will talk about a "fast" bow. What they mean is that arrows coming off that bow are going faster than the same arrow would shot off another bow of the same poundage. The energy in an arrow is the integral of the force on the arrow across the entire distance of travel of the string. If the bow only "stacks" at the very end, meaning you pull with 1-10 lbs force until the last inch then you're pulling with 65 lbs force the same will be true as the string pushes the arrow forwards. As a result this would be a "slow" bow. Compounds will actually spike up to say 70 and then have a "let-off" at the end and drop back down to say 50, making it easy to hold full draw. They use cams for this. Recurve and longbows can't do that, so usually a "fast" bow is a bow that stacks quickly and then the curve gets pretty flat early in the draw.
  • Arrow:
    • length - the length of the arrow, what you'd expect
    • spine - the stiffness of the arrow, more on this shortly
    • shaft weight - the weight of the shaft of the arrow, this impacts where the center of gravity is and the net weight of the arrow.
    • tip weight - the weight of the tip on the arrow. Hunters try and match their tip-weight when practicing to the weight of the broadheads they'll shoot when hunting. You don't practice with broadheads cause it messes up the targets and wears out your broadheads. So you practice with the closest thing, a target tip of the same weight.
    • fletching - That bit at the back... and yes this is probably last as far as performance is concerned.

Now... why does all of this matter? Take a random arrow and a random bow and shoot it. The arrow will fly off the bow and "whip" back and forth as it flies. This "whip" makes it hard to hit anything since the arrow is literally moving left and right as it flies.

An arrow can whip because of the release if you "pluck" the string and induce a sideways motion in the back of the arrow. It will retain this motion until it uses up that energy either by flexing or whipping (wind resistance). Fletching obviously helps, but, In control theory terms, the system is improperly damped so won't actually converge to straight very quickly.

But, even if you don't pluck the string an arrow will have some sideways component. In reality the arrow doesn't usually come off the absolute center of the bow. It's very close, but not quite even on a "center-cut" bow like mine. So, why do arrows *ever* fly straight? It's because the arrow bends. As the string pushes on the arrow it causes the arrow to bend slightly. The arrow literally warps around the bow. such that it's center of mass follows a straight line the whole time.

If the arrow isn't matched to the force being input into the arrow it will warp too much or not enough. As a result it will end up flying slightly sideways, and whip. Note that the arrows length, weight distribution, and flexability affect how the arrow flexes. Also note that the bow's exact force function, that is poundage, "speed", and brace-height also affects things.

So we have a heck of a lot of variables. But, in the end it's pretty simple. Take a raw unfletched shaft with whatever tip you might shoot so you don't have to worry about the arrow correcting it's flight much (we've made the system overdamped). Shoot it and see if it points left or right. Assuming a good release. One direction means it's too stiff, the other it's too bendy. Adding weight to the tip, or length is equivalent to making it more bendy.

Now, there may be no setting that makes it shoot straight. So we can fiddle with the brace-height (usually you'd actually do this first, since it's really easy). There's no science to brace-height, generally a higher brace-height will shoot more predictably, but not always. So, you go up a few twists at a time until it shoots right and "feels" good. A lot of bows will change sound drastically when you hit the sweet spot. More brace height means less distance the string travels, so in general you don't want to go higher than you have to, since your arrow will go slower. A bow that shoots well with a low brace height will tend to be a "fast" bow. Some people get obsessed with speed, it doesn't necessarily matter, but there's no reason to waste energy if we don't need to.

Conclusion

I've been doing archery on and off since I was maybe 13. A little while ago I learned some more of the technical details, got some books on instinctive shooting, and changed the whole way I shoot. This tuning of my setup though was the biggest change I've felt as long as I've been shooting. Everything I've done previously feels like a joke, now suddenly I can shoot arrows, and they go where I point them... no I don't point perfectly, but suddenly it feels like it'd be so easy. Years of practice, and then an hour with someone really good completely changed everything. I have another bow actually, I'm really curious how it would shoot with a few adjustments.

Morals: Never trust so-called experts like archery shops. Figure everything out yourself, from scratch, systematically, if you possibly can. Don't assume you just suck :P. Find someone you trust, who actually knows what they are talking about, and get a couple of hours of their time. Suddenly everything is different.

I'm excited... it's so different I need to practice a bit, but it feels like pretty quickly I'll be good enough to hunt deer.

2013-06-05

What's in the truck

So, I moved my house into a pickup truck. Unsurprisingly, not everything I owned fit. So how did that work?

First, I had been toying with the idea of being nomadic since I was a kid. I used to design offroad campers out of legos when I was like 5. In college I got on a bit of a minimalism kick as many of you know. I also carried enough stuff in my school pack to travel the world or go on an impromptu uncomfortable backpacking trip. At that time I started targetting everything I owned fitting in a backpack... this was not feasible though given my many hobbies. So I never got close.

I moved out to the bay area with just that little daypack. BUT behind that I mailed about one SUV full (with seats down) of stuff. That's not including things like a bike I purchased on this side, a futon bed, eventually a futon couch, etc. in 2009 when Jess and I hiked the Appalachian trail, we decided we had to go on the road eventually. Ever since then I've been targeting everything I owned fitting in a vehicle. When we purchased a vehicle we had this idea in mind. We considered purchasing something better for the city, but Jess likes pickup trucks and it fit our needs even then relatively well. So since then I've been targeting fitting my stuff in the Tacoma. About a year ago I realized that fitting BOTH our stuff was going to be hard and started thinking through the list in my head very critically.

All plans go out the window upon confrontation with the enemy. But as my manager at Google said, plans are useless, planning is essential. When I went to fit everything in the truck it fit... not easily as it needed to to later add Jess' stuff, but it was enough to get out of the apartment.

IMG_20130512_144224.jpg

So what's in there? Here's a short list

  • rubbermade tub of tools (saw, hatchet, machete, awls, punches, needles, plyers, gloves, measuring tools, etc. This box also contains the tire repair kit and inflater)
  • rubbermade tub of truck tools (full ratchet set, locking pliers, some fluids, 16000 lb rope, snatch strap, shovel, etc.)
  • rubbermade tub of cooking supplies (old aluminium pot set, cast aluminium pot, utensils, stove, hygene stuff, spices, flutes and penny-whistles, mugs, etc.)
  • rubbermade tub of instant/backpacking food
  • huge tub of specialized gear (spare backpack, climbing gear, snowshoes, ice-axe, important documents, warm boots, etc.)
  • large tub of clothing and books (3 pair pants, 2 pair shorts, 4 shirts, boxers, socks, a couple pretty wallhangings)
  • cardboard box of bulk food (rice, qinua, couscous, amaranth, oatmeal, etc.)
  • large duffel of SAR/backpacking gear (hiking poles, cookset, fluffy pants, etc.)
  • fullsized guitar in hardcase
  • 5 gallon bucket with lid (currently contains a deer hide I'm working on, originally contained left-over 2x4 ends I've now burned)
  • 4 1 gallon plastic water containers
  • large bag of wool (I intend to felt it, but haven't gotten to it yet).
  • loose: 45 lb bow, 55 lb bow, quiver of arrows, atl-atl, firedrill parts, walking-stick flute, second green deer hide, sawed off packframe
  • small duffel: tanned deer-hide and other materials for making things
  • small box: electronics! (laptop, kindle keyboard 3G, bluetooth and usb keyboards, chargers, inverter, cellphone, spare hard-drive)
  • On top of platform: wool blanket being used as a sleepingpad, 2 sleepingpads, down quilt, silk liner (so I don't kill the quilt), big duffel for laundry
  • in jump seats: More food, daypack with a few items in it.
  • in jump seat storage compartments: tire-chains, jumper cables, scraper, flares, first-aid kit, duct-tape

This isn't exactly minimal, I've got a lot of stuff that while nice is probably not *needed* per say. I have too many hobbies and interests it turns out :D. Ultralight backpack

So, that's what I've got. I was going to hang on to my personal floatation device since I still want to find a swiftwater class that fits in my scheduler, but it didn't fit in the truck. I've got probably 150 lbs of tools. I just repacked the truck yesterday because a friend and I realized that it was healing slightly - I'd loaded the left-side heavier which is where I sit and where the gas tank sits.

I have a ham-radio in the glove compartment. I had a CB though the antenna was a mag-mount which, with all the 4-wheeling I've been doing, has now been knocked off and broken - so I need to do a better mounting. My laptop's battery is dead, but can be use it off the inverter. The 12v socket I installed in the rear is very useful for this. My cellphone can be used for data tether, it's slow but sufficient for writing long emails. I'm on $3.00 a day plan now every day I use it. My kindle is a 3G so I can check my email for free anywhere in the world. For blog posts I've been using various free wifi. At the moment I'm in a coffee shop. A lot of laundromats have wireless as well.

When Jess moves in I'll probably have to give up the fullsized guitar, a bit of food space, a bit of clothing, most of the books, and maybe a bit of the cooking gear to fit in Jess' stuff. I keep making passes through the stuff and getting rid of things. Speaking of... who wants a blood-pressure cuff? I've been toying with the option of building a roof-rack on the cab (since my cap is above my cab this wouldn't make the wind-profile much worse). It's going to be annoying though and hurt gas-milage, so if I can avoid it all the better.

One big mistake I made. I couldn't figure out how to get a gas-tank on the roof in time (I didn't get a holder for my jerry-can). I gave up and put it in the back. I'd already added new gaskets and tested it so I thought it didn't leak... well 7000 ft of elevation and a low-pressure front made it leak. It destroyed a shirt and my wool blanket. I saved a couple of other pieces of clothing with my brother's advice of using dawn dish detergent. Hint: if you carry a noxious liquid make REALLY SURE it won't leak. I'm never carrying gas inside the vehicle again if I don't have to. So, for now I have no spare gas-tank, which kindof sucks... oh well.

I've been surprised, I'm doing a lot more off-roading than I expected. I knew I'd do it to get to good boondocking sites, but at least up on route 80 where I was hanging out last week the good sites really *require* a truck if you're going to do this routinely and not damage your vehicle. This week I've been hanging around the bay area. I came down for the weekend to see some friends and plan a backpacking trip with them, and didn't get out soon enough to make the gas cost worthwhile. I had some errands to run around town anyway. More on those projects soon :).